Scuff Leather Dye Repair Kit LRCK1

Steering Wheel Scuff Repair Kit
Leather Dye Steering Wheel Repair Kit LRCK2
October 24, 2017
Show all



LRCK1 Scuff Repair Kit Perfect For Small Touch Ups and Minor Damage.

  • Easy to use
  • Simply Sponge on
  • Or spray on
  • Quick Drying
  • Hard Wearing
  • Scuff Repair Kit
  • Matches Manufacturers Finish

Four Very Easy Simple Steps For A Perfect Repair With The This Repair Kit Clean It: Use the premium leather cleaner to clean your leather item fully to remove all dirt.

Prep It: Use the leather prep, to remove some of the old surface colour on the area needing repair.

Colour It: Using the colours, simply sponge on to re colour your leather item, providing a perfect seamless repair.

Seal It: Sponge on the clear coat sealers / lacquers to lock in the new colour. Why not take a look at our Scuff Repair Kit video over on YouTube

Car Seats: This scuff repair kit is perfect for repairing and re colouring areas of colour loss on car seat bolsters, blends in the colour and repair to make the damage perfectly invisible.

Car Seat Piping: Great for touching up piping on classic and vintage car seats.

Leather Furniture: The scuff repair kit can also be used to colour in the edges of leather furniture where it’s all worn through. The Leather Repair Company have a good selection of scuff repair kits and leather repair kits to tackle any size job you want to carry out as DIY repair at home or work or even around the office.


Our Kits are unique they are a very easy, simple four stage process.

1/ First of all you will need to clean the leather thoroughly.

2/ The next step is to use the prep, this is designed to remove some of the old surface coating, the reason for doing this is its removing all old dirt, grease, waxes and oils from the surface and some of the old manufacturers finish, this then gives you a base to work from allowing the colourant to adhere correctly to the leathers surface. Without removing some of the colour, the new colour wont bond correctly.

3/ The next stage is to colour the area to be repaired.

4/ Once coloured, you then seal this over with the clear coat sealers (Gloss and Matt Finish) the gloss and matt finish can be mixed together to give you a satin finish if this is the desired look you require, this can be done by mixing them 50/50.

Spraying On Colour

Due to how the colourant dyes are made some dyes are thicker than others, the best way to thin them is using a small amount of lacquer that comes with your colour repair kit. But you can add a small amount of water if you wish, do not put in too much water as this will affect the covering power of the colourant paint.

It’s always best to apply the first coating using a sponge and then spray afterwards, do not spray from the start.

When adding water 10% should be sufficient

An airbrush type gun is best with a No5 needle spraying at around 20psi

Cleaning Out Spray Guns

Cleaning out spray guns is simple as products are water based, so you can wash the gun through with warm water or thinners if you wish.

Kit Contents

Now Comes with the Additional 100ml Premium Leather Cleaner..

  • 1 x Main Base Leather Colour 50ml
  • 3 x Tinters 5ml each ( sometimes more depending on the base colour)
  • 1 x Leather Gloss Finish 30ml
  • 1 x Leather Finish Matt 30ml
  • 1 x Leather Prep 50ml
  • 1 x 30ml Mixing Cup
  • 3 x Application Sponges
  • 1 x Mixing Stick
  • 2 x Tooth Picks
  • 2 x Cotton Buds
  • 1 x Sand Paper
  • 1 x Detailed Instructions.
Video Guide

Colour Chart

Product Info Video

Open chat
Hello! Can we help you?
Click the icon below >>